| Tool Number | Tool Name | Price (USD) | |
|
1750A
| Transmission Overhaul Stand (Mechanical Rotation, Hydraulic Tilt)(Use with J21279-01, J24462 (Required for MT600), J24310, J26405, J29004 & J34655,J-44723, and J-29004 Adapters) |
4,560.34
|
|
|
J-01927-1
| 1/2"-13x6" Guide Pins (Extension Housings) (2 Req''d) |
33.92
|
|
|
J-03289-20
| Holding Fixture Base (Use With J23642) |
146.40
|
|
|
J-06438-A
| Forward & Fourth Clutch Spring Compressor (Also MT 6 Spd Bellevill Spring) |
181.22
|
|
|
J-21279-A
| Transmission Overhaul Stand Adapter (Use With J29109 or &9389-04) (J24462 Required for MT 600) |
460.06
|
|
|
J-21867
| Universal Pressure Gage (0–300 PSI) |
121.53
|
|
|
J-23410
| Torque Multiplier (1,250 lb ft) |
756.75
|
|
|
J-23549
| Stator Thrust Bearing Installer (AT 543, MT 643, 653 & MT 6 Spd) |
246.66
|
|
|
J-23642-A
| Transmission Holding Fixture |
212.17
|
|
|
J-23907
| Slide Hammer Assembly |
89.65
|
|
|
J-24171-A
| Seal Dust Shield Remover |
75.53
|
|
|
J-24198
| Dust Shield (Front Seal Installer — HT 740D) (Use With J24202-4) |
183.88
|
|
|
J-24202-4
| Driver Handle (Use With J24198, J24202-1A, J24447, J24448A, J24449A & J24620A) |
240.33
|
|
|
J-24204
| Clutch Spring Compressor Set |
424.35
|
|
|
J-24204-2
| Bar & Stud Assembly (Use With J24204-1, J24204-3, J24452) (Part of J24204) |
101.33
|
|
|
J-24217
| Main Shaft Orifice Installer |
103.00
|
|
|
J-24218
| Stator Cam Spring & Roller Retainer Ring Set (AT 543 Only) |
86.66
|
|
|
J-24218-1
| Stator Cam Spring & Roller Retainer Ring (2-13/16" O.D.) (AT 543 Only)
(Part of J24218) |
28.00
|
|
|
J-24218-2
| Stator Cam Spring & Roller Retainer Ring (4" O.D.) (Part of J24218) |
39.83
|
|
|
J-24314
| Valve Ring Adjusting Tool |
73.33
|
|
|
J-24315
| Guide Pin Set Consists Of: |
617.98
|
|
|
J-24315-1
| Guide Pin, 3/8"-16x6" (2 Req'd) (Part of J24315) |
78.96
|
|
|
J-24369
| Orifice Plug Installer (Main & Output Shaft) (Output Shaft Only for
MT 640-650 & CLT/CLBT 750) |
41.20
|
|
|
J-24420-C
| Universal Puller (Use With J24463-2 or J24534 Legs) (Part of J24463) (J43910) |
85.82
|
|
|
J-24447
| Output Shaft Front & Rear Bearing Installer (Use With J24202-4) |
101.62
|
|
|
J-24449-A
| Oil Pump Seal Installer (Use With J24202-4) |
219.99
|
|
|
J-24451
| Output Shaft Needle Bearing Installer (All Except MT 654 & Retarder Models) |
53.69
|
|
|
J-24452
| Low & First Clutch Spring Compressor (Use With J24204-2) |
126.66
|
|
|
J-24453
| Lock Ring Installer (Second & Third Clutches) |
57.95
|
|
|
J-24454
| Gear Unit Lifter |
304.11
|
|
|
J-24455
| Center Support Lifter |
301.34
|
|
|
J-24458
| Valve Pin Installer |
129.33
|
|
|
J-24459-5
| Spring Compressor Adapter (2 Req'd) (Updates J24459 to J24459-A) |
137.33
|
|
|
J-24459-A
| Main Regulator & Lockup Valve Spring Compressor |
353.62
|
|
|
J-24461
| Centering Band, Oil Pump Body to Front Support |
166.66
|
|
|
J-24462
| Adapter Plate (Use With J23642-01 for MT 600) (Also Use With J21279-01
to Adapt to J9389-03 & J29109) |
77.78
|
|
|
J-24468
| Sun Gear Bushing Installer |
93.72
|
|
|
J-24469
| Front Planetary Bushing Installer |
164.80
|
|
|
J-24470
| Converter End Play Gage (AT 543) (2/300 Series Converter) |
323.39
|
|
|
J-24472
| Low Carrier Bushing Installer (MT 650, MT 653DR) |
160.00
|
|
|
J-24473
| Front Support Assembly Lifter |
310.02
|
|
|
J-24475-B
| Snapring Selective Assembly Fixture |
384.52
|
|
|
J-24534
| In Vehicle Rear Bearing Remover Legs (Use With J24420-B) |
157.93
|
|
|
J-24620-A
| Output Shaft Seal Installer (Use With J24202-4) |
253.33
|
|
|
J-24648
| Converter Bushing Installer |
81.98
|
|
|
J-24794
| Center Support Bushing Installer |
76.36
|
|
|
J-25393-A
| Front Output Shaft Bearing Outer Race Installer |
135.96
|
|
|
J-25587-A
| Planetary Carrier Rebuilding Set |
9,066.44
|
|
|
J-26282
| Shift Lever Shaft Seal Installer |
73.33
|
|
|
J-26401
| Shift Lever Seal Remover |
70.00
|
|
|
J-26417-A
| Pressure Gage Set |
826.65
|
|
|
J-26470-A
| Governor Rebuilding Set |
1,397.86
|
|
|
J-26857
| Pump Gear Gage Set |
549.32
|
|
|
J-26901-A
| Output Shaft Front Bearing Puller Bolts (MT 654CR Only) |
71.40
|
|
|
J-26912-A
| Oil Pump Oil Seal Installer |
360.48
|
|
|
J-26913
| Clutch Pack Clearance Gage (.079-.130) |
56.57
|
|
|
J-26914
| Clutch Pack Clearance Gage (.074-.147) |
55.00
|
|
|
J-26915
| Second Clutch Pack Clearance Gage (.049-.111) |
82.40
|
|
|
J-26916
| Third Clutch Pack Clearance Gage (.050-.114) |
56.31
|
|
|
J-26917
| Clutch Pack Clearance Gage (.064-.125) |
53.56
|
|
|
J-26918
| Clutch Pack Clearance Gage (MT 654CR Only) |
61.80
|
|
|
J-26995
| Spring Test — Chatillon MST50 |
8,364.79
|
|
|
J-28435
| Converter Pump Hub Roller Bearing Remover & Installer |
190.00
|
|
|
J-28446-A
| Staking Tool, Sun Gear Bushing |
530.43
|
|
|
J-28684
| Governor Support Pin Installer |
230.99
|
|
|
J-28708
| Remover, Governor Support Pin |
247.53
|
|
|
J-29032
| Counterbore Cutter, Center Support |
254.06
|
|
|
J-29146
| Clutch Pack Clearance Gage (CLT 654 Only) (.091-.148) |
76.00
|
|
|
J-29156
| Clutch Pack Clearance Gage (CLT 654 Only) |
93.33
|
|
|
J-29198
| Gage Set, Center & Front Support Sealring |
833.31
|
|
|
J-29198-2
| Gage, Center & Front Support Sealring |
314.99
|
|
|
J-29355
| Remover & Installer Set, Lube Valve Spring Guide |
446.32
|
|
|
J-29497-4
| Forcing Screw (Use With J26901, J8433-1 & J22912-01) (MT 654CR Only) |
73.33
|
|
|
J-29618
| Output Shaft Seal Installer (Retarder Models Only) |
275.82
|
|
|
J-29863
| Lifter — Valve Body |
69.13
|
|
|
J-33163
| Valve Body Parts Tray Set |
126.66
|
|
|
J-33163-1
| Small Parts Tray (Part of J33163) |
64.27
|
|
|
J-33163-2
| Valve Body Parts Tray (Part of J33163) |
62.89
|
|
|
J-33410
| Neutral Start Switch Wrench |
180.66
|
|
|
J-33429
| Accumulator Spring Compressor (Retarder Models Only) |
329.59
|
|
|
J-33820
| Output Shaft Bearing Installer (Retarder Models Only) |
266.66
|
|
|
J-33821
| Output Shaft Bearing Remover (Retarder Models Only) |
559.99
|
|
|
J-3387-2
| Guide Pin, 5/16"-18x3" (2 Req''d) (Part of J24315) (Also MT 6 Spd) |
78.28
|
|
|
J-34015
| Output Shaft Needle Bearing Installer (MTB 644, MT 654 & MT 653) |
213.33
|
|
|
J-34016
| Output Shaft Needle Bearing Installer (MTB 644, MT 654 & MTB 654) |
205.99
|
|
|
J-34127
| Center Support Snapring Gage (Part of J23717-C, J24475-B & J24208-D)
Updates J23717-A & B to J23717-C
Updates J24208-C to J24208-D
Updates J24775-A to J24475-B |
161.33
|
|
|
J-3453
| Flange Yoke Holding Bar |
299.99
|
|
|
J-34814
| PTO Height Gage |
169.40
|
|
|
J-36376
| Front Support Oil Pump Bushing Remover and Installer |
125.04
|
|
|
J-38460-A
| Digital Protractor |
426.99
|
|
|
J-39362
| Rear Front Support Needle Bearing Installer |
132.00
|
|
|
J-39776
| Digital Calipers (0–6" Range) English/Metric |
362.39
|
|
|
J-41406
| Sun Gear Bushing Installer |
125.33
|
|
|
J-41406
| Sun Gear Bushing Installer |
125.33
|
|
|
J-44950-I
| Allison DOC(R) For PC-Service Tool V8.0.0 (New DOC User) |
495.00
|
|
|
J-46148
| Electric Modulator Breakout Harness |
126.66
|
|
|
J-46550-A
| 2nd GEN Transmission Cooler Flush Cart |
6,665.00
|
|
|
J-47134
| CEC - Off-Highway Translator |
766.65
|
|
|
J-48624
| Nexiq USB-Link |
987.76
|
|
|
J-50088
| Pall Aftermarket Filter Element |
106.66
|
|
|
J-6125-1B
| Slide Hammer (Use With J24412-2) |
83.44
|
|
|
J-8092
| Universal Driver Handle (Use With All Threaded Driver Heads) (Also MT 6 Spd) |
25.93
|
|
|
J-8433-1
| Cross Bar (Use With J26901, J22214-1 & J22912-01) (MT 654CR Only) |
126.84
|
|